COMPANY
:
Saxon
CATALOGUE
:
Sakura 2010
CONTACT
:
Romeo Pereira
TEL
:
01488 689 400
WEBSITE
:
EMAIL
:

Sakura offers a full range of car accessories. You will find anything you need, including car mats, tailored car mats, seat covers, wheel trims, 12v accessories, summer and winter accessories and general accessories. All Sakura products are keenly priced to offer unbeatable value for money. with bold consumer-friendly packaging, they will fly off your shelves. Quality is essential and Sakura products are subject to rigorous Quality Control procedures performed by independent auditors. Sakura is exclusively available from Saxon.

COMPANY
:
Saxon & Magic Tree®
CATALOGUE
:
Magic Tree®
CONTACT
:
Romeo Pereira
TEL
:
01488 689 400
WEBSITE
:
EMAIL
:

Over the last 50 years, Magic Tree® air fresheners have become the most recognized and respected brand of air fresheners in the world. Thanks to its unique design and quality of manufacture, Magic Tree® air fresheners have gained, retained and grown consumers’ trust. Magic Tree® is one of the greatest impulse buys in the Automotive Aftermarket. It offers unbeatable value for money combined with a wide variety of fragrances and great consumer loyalty. Magic Tree® air fresheners are exclusively available from Saxon.

COMPANY
:
Gates
CATALOGUE
:
Fuel Cap Catalogue
TEL
:
01387 242032
WEBSITE
:

The Gates Fuel Cap catalogue is becoming the first call for details about locking and non-locking fuel caps for most vehicles, from cars to light commercials as well as heavy trucks and buses. New applications are included from the Peugeot, Citroen and Iveco ranges, while several AdBlue Tank applications – resistant against urea corrosion – are notable additions to this increasingly impressive range of must have accessories. All fuel caps are clearly illustrated with front and rear views and displayed complete with all relevant dimensions. Visit www.gatesautocat.com for more details.

COMPANY
:
Granville Oil & Chemicals
CATALOGUE
:
'Make the Right Choice with Granville'
CONTACT
:
James Holland
TEL
:
01709 880099
WEBSITE
:
EMAIL
:

Featuring Granville’s entire range of over 300 automotive chemicals and lubricants, including the latest fully synthetic engine-specific oils for cars and CVs, plus an expanding list of ‘premier brands’. These include Autosol’s new Metal Polish range, Ambersil’s maintenance products, Dreumex hand cleaners, Gunk, Nova, Hylomar, Jenolite rust treatments, Nilco glass cleaners, Wynn’s, 10K Boost, and Ce-lit Radiator & Cooling System Repair. Plus Granville’s branded chemical range for maintenance workshops, body shops and general car care.

COMPANY
:
JHM Butt & Co Ltd
CATALOGUE
:
Workshop & MOT Supplies
CONTACT
:
Mark Bean
TEL
:
01302 718220
WEBSITE
:
EMAIL
:

Butts of Bawtry have been in business since 1971 offering Garage Equipment, Tools, Mot Supplies, Forecourt & Showroom supplies and Personalised Products such as MOT wallets, Tax Discs and Key Fobs.  Our prices are very keen as we import most of our products at very competitive prices.  We sell to a wide range of companies from one man bands to companies with over 600 sites.  We pride ourselves in offering an excellent service at a competitive price.

COMPANY
:
GSF OPENS BRISTOL NORTH BRANCH

Factor chain GSF Car Parts has announced the opening of a new store in Bristol.

Located at the Aztec West Business Park, Bristol North joins its South and central branches within the region as part of company expansion plans.

Following a similar setup to other stores, the 10,000sq ft. facility houses GSF’s fastest selling lines including braking, filtration and clutches with a strong focus on OE equipment for workshops.

“We’ll be looking initially within a 15 mile radius for deliveries”, said Simon McMullen, Regional Director at GSF Car Parts. “Our analysis suggests this gives us well over 100 garages and associated trades to target, so there are lot of opportunities for us” adding that the factor hasn’t ruled out building more sites across the city.

He concluded. “We’ve got experienced staff in place who know Bristol well. It’s been a great team effort to find and fit out suitable premises, put the staff in place and open with stock on the shelves – all in under a couple of months. We’re sure there’s even more potential for us around the area and we’ve been excited by the enthusiastic response already.”

For more information on deliveries and opening times, garages can head over to the GSF website.

COMPANY
:
STEELS THE ANSWER IN MODERN GASKETS

We know what a gasket is, but what does it actually do, and how?

Fibre gaskets now less popular

What is a gasket? It sounds like an obvious question, but in point of fact, it is not the easiest to answer. Some would say it is any flexible material used to mate two surfaces, while others would have a more technical answer that distinguishes a gasket from a seal. Others, particularly those that own anything powered by the Rover K-series, might have another (possibly unprintable) definition of a gasket.

But for the rest of the aftermarket, when someone talks of gaskets they are generally referring to the cylinder head gasket, which as everyone knows is to act as an air, oil and watertight seal between the head and the block. If the gasket blows when the engine overheats then the driver will hopefully notice the sudden increase in temperature and take action before the head warps or the block cracks.

COMPOSITION
Head gaskets generally used to be made from a form of fibre, but these days are more often than not made from steel. The reason for this is that the crush rate is far more predictable, meaning the head can be tightened with a torque wrench without needing to carefully half-tighten each of the bolts in turn.

Another reason for using steel is that with crush gaskets the height of the cylinder head can vary, literally depending on how much the gasket is crushed under the cylinder head. This might seem like an inconsequential amount, but it makes a difference to modern fuel injectors that have a tolerance of only a few microns.

Steel gasket

PROBLEMS
However, steel gaskets have not been without problems. OEMs have battled with creating a gasket that will apply an adequate amount of pressure to stop gasses from escaping. One way of doing this is to add an additional ‘fire ring’ into the steel, although some aftermarket gaskets don’t have this welded ring, instead relying on a ring folded into the metal. Last time we addressed this issue, we spoke to Dominic Moxon, a Senior Product Engineer at FAI Automotive who explained: “The problem is this folded design will not last as it will not be able to cope with the pressures generated in the combustion chamber”.
Clearly, having to do a job twice, particularly an involved and complex task like a head gasket, so it pays to track down a gasket of a similar design to whatever was fitted to the vehicle originally.

WELL I’LL BE BLOWN… GASKET MYTHS DEBUNKED
Paul Grosvenor from Mahle advises that one of the most common misconceptions is that a good plan with a diesel engine is to replace the head gasket with a thicker one.

“It is not best practice to do that” he says. “The difference in the gasket thickness exists primarily because of the tolerance on other parts. It can ultimately affect the emissions levels by using a thick gasket when it should use the thinnest one”.

“Best practice is to fit like for like, because gasket thickness is calculated on the protrusion of the piston from the engine block so if they are only changing the head gasket they should fit the same as was fitted on it originally”.

UNDERLYING ISSUE
Dominic Moxon of FAI Automotive says that if a head gasket has been fitted for some time suddenly goes then technicians need to look for an underlying cause. “There is always a reason for it failing whether that is down to a manufacturing process, installation issues or a running fault”.

REMAN STANDARD
Simply replacing the gaskets and cleaning a used engine does not make it a remanufactured part. In the UK, the Federation of Engine Remanufacturers agreed a set standard for remanned engines 20 years ago and more recently agreed a strict definition with six other trade groups. John Gray, FER President, said: “The remanufacturing industry has lead the acceptance of a range of terms that have UK origins. This international agreement also provides us with further proof that remanufacturing is on the rise, which is extremely positive for the industry.”

Best practice is to fit gaskets like for like

COOLING BLOCK
Pour-in instant head gasket is hardly a professional repair, but claims that it will clog or cause damage to the cooling system appear to be wide of the mark, at least if you are using the Steel Seal product. “It contains no fibrous material to seal your blown head gasket. It relies on a thermo chemical bonding process that is a chemical reaction, to seal the leak in your blown head gasket” reads a statement from the company.

COMPANY
:
AUTOMECHANIKA IN REVIEW

For us at the magazine, it is funny to think that 2017 was only the second time Automechanika has taken place at the NEC, such is the amount that we have written and speculated about it. Nonetheless, this is only the second time the show has happened here, and it seems much of the aftermarket holds an opinion about it.

For me, the proceedings started the day before the event as SMMT had invited a handful of journalists to dinner at a nearby country pile to talk about the show, the aftermarket and the motor industry in general. One interesting stat that Chief Exec Mike Hawes raised was that the British public now spend more online on car accessories than they do on cosmetics. I haven’t been able to verify this yet, and I suspect it includes replacement tyres and servicing booked online, but even so it goes to show that the new generation of motorists are less willing to do things the old way. A point to ponder perhaps.

After the show was opened, complete with ribbon cutting and the traditional comedy big scissors (I wonder where they come from?) the show got underway and we grab show organiser Simon Albert for a few words. As the show had only just opened, he didn’t have much to tell us that we didn’t already know, such as the longer opening hours, increase in aisle space etc. However, he did confirm his hit list of companies that he’d like to see attending in the future and, of most significance to us, confirmed that the show would return next year.

On the Valeo stand

This surprised me a little, as I’d assumed that the show would become biennial in the years that the Frankfurt show was not held. However, I was keen to get going as my appointment book was full and I was running late before I had even started.

The first visit took me across Hall 19 and into Hall 20 where I could have a quick look at some of the stands as I scurried past. Liqui Moly and Auto Repar had particularly amazing looking stands. Schaeffler had used a space right next to the main entrance to build a gleaming white stage where cutaway versions of various products had been mounted on plinths for the reps to demonstrate. Valeo meanwhile, had approached the concept of having a stand in a different way, as it had simply brought a huge truck and trailer kitted out with demonstration models of various things into the hall.

MEANDERING
I won’t trouble you with the details of every meeting I had or what everyone said, except that on the first day a number of stands reported that footfall seemed a little low, which could be down to appalling weather that day as well as a crash blocking one of the motorways near the NEC that may have put some off attending. I should add that if the attendance was low on the first day, I didn’t notice it. From my point of view, Hall 19, where I spent the bulk of the time, seemed annoyingly busy with meandering people with a tendency to stop in front of me filling the aisles.

It was pleasing to see that many exhibitors had brought in things other than their products to keep people amused. Sales-i brought an Out Run arcade machine for example (a game that I spent too much time on in my youth). Denso brought a VR racing car simulator, which I quite fancied trying out, but decided not to as the racing driver Rebecca Jackson was looking on, and I had no wish to humiliate myself. Other stands brought various cars and bikes from series that they sponsor as well as the usual show novelties.

Holding an event after the show is always a risk, because while there will be a ready supply of people in the industry who are in the same place, there is no telling that they will be in the mood to go somewhere else after spending a day at the show. Even if they do, there is every chance that someone else has invited them first. With this in mind, I was curious to see how many people went to an event held by Motaquip at Warwick Castle on the first night. The answer as it turned out was a lot of people as the event was full. It was one of the more fun events that we’ve been to, with two apparently empty suits of armour jumping off the wall and alarming diners by staging a battle between the tables.

STAGES
Back at the show the following day I would have liked to have had more time to attend some of the industry and technical seminars that were taking place on a number of stages across the halls. Big names from the world of diagnostics including Frank Massey and James Dillon had been brought in as a lure to get technicians to the show (which by all accounts worked) while the heads of the garage associations talked about the various threats and opportunities du jour in the aftermarket. I did manage to get over to hear the winner of the Garage of the Year announced, which turned out to be Motorserv UK, which readers who have been paying close attention might recall we visited this time last year.

One notable absence from the show was TMD Friction (who are on record saying that they have ‘no plans’ to exhibit). However, the company did rent a plaza suite just outside of the main halls to hold a Pagid Live event in association with Euro Car Parts where a number of garage owners and technicians (the majority of whom had been brought down for the event) who, after a day at the show spend a couple of hours enjoying presentations on the benefits of the Pagid Expert programme and on ECPs garage scheme (see Hot Story).

If your reason for visiting the show was to find new products, you wouldn’t have been disappointed. Delphi brought a new bit of diagnostic kit for high- pressure injectors, European Exhaust and Catalyst introduced a 6-in-1 fuel system cleaner at the show and in a similar vein, Forté launched a 4-in-1 cleaning machine. Essentra Components launched something called a ‘High Tech Fluid Absorption Plug’ and I’m sure there were many other things never before seen at the event.

Throughout the show, I spent most of my time in the three aftermarket halls, but on the final day I had a meeting with Stericycle (a company that manages recalls for the VMs) and so I spent a while exploring the area dedicated to the automotive supply chain. It was markedly quieter than the aftermarket halls, although it should be noted that while the supply chain market as a whole is huge and worth big money, the number of buyers within it is relatively small, and stands dealing with VM services were of little interest to technicians, so it might be unfair to judge its success on the amount of feet in the room alone.

‘Billy’ character on Bosch stand

However, the highlight of the show for me came late in the afternoon on the final day when Helen Watkins from Bosch, who was manning the Extra stand, was accosted by a strange small man who kept offering her some of his special ‘home made’ sweets, much to the amusement of onlookers – apparently he’d been coming on the stand and doing this at various points throughout the show. However, just when Helen couldn’t stand the embarrassment anymore, the fellow took off what turned out to be a wig and false teeth to reveal himself as a well known customer of the firm. Apparently, his alter-ego ‘Billy No-Mates’ is a character that he regularly performs for some of his unsuspecting suppliers, and it was much to the amusement of the crowd that had built up.

It was almost time for us to leave in order to high-tail it back to London while there was still time to vote (remember that?) One point that is inescapable is the topic of the show frequency. As a conservative guess, I reckon I spoke to 40 company bosses during the show and the overwhelming majority said that they thought the show should run once every two years, preferably during the non- Frankfurt years in order to keep costs reasonable and keep the momentum of the show. From the point of view of the whole CAT team, we could have happily stayed there for a month if we could – there were so many people to see. However, I’m always curious to know the experience of our readers. Did you go? Were you exhibiting? What were the highlights, and what would you have liked to have seen? Give me a shout at greg.whitaker@haymarket.com.

COMPANY
:
A POINT OF DIFFERENCE

David Williams takes us on tour around Michelin Licensee Future Developments.

Stoke-on-Trent is known as the Potteries for its heritage in throwing all kinds of clay, from fine bone china to toilet pans. However, in recent years the city has become a logistics hub housing many distribution centres. A major player here is Future Developments – a manufacturer supplying car care products and aerosols to large retailers up and down the country.

18 months ago, the firm inked a deal with Michelin where it became an official licensee for the UK and Ireland. Dave Williams, Sales Director of the firm, explained: “We manufacture specifically for niche markets. We never had a brand before and Michelin came to mind because it was in local [Michelin has a niche tyre production facility in nearby Shelton] and they were keen to do it”. He continued. “We’re looking to create a brand over the next two to three years by bringing in and making products with a difference”.

With 700 products to manufacture, a large space and the essential amenities are required. While touring the site, Future Developments seems to have all the facilities to hand with a 7,000 sq ft site containing three shipping containers for raw materials and bottles, an aerosol storage plant and a production warehouse where over 10,000 Michelin-branded products are produced each day, before they’re tried and tested on site. Once approved and set to the required standards, products are boxed up and packaged for distribution.

PRODUCTS AND PROMOTIONS
Another well-used area is the mock-shop showroom, which has a plethora of retail products sporting the Michelin brand. Wheel trims, inspection lamps and breakdown kits were displayed on shelves next to the firm’s other wares such as insect repellents and stain removers for the household domestics market as well as graffiti removal – a regular purchase among city councils across the UK. Ray Bowles, Managing Director of Future Developments, said. “We distribute all the Michelin wiper blades as well as snow brushes, ice scrapers, snow shovels and wheel trims”, adding that the firm has expanded its wiper blade distribution overseas.

Williams mentions that retail customers can benefit from some handy upsell opportunities such as Michelin point of sale (POS) display stands. He adds. “Customers can purchase our promotion stands to upsell their products in store. Another example is our screenwash, which we’ve designed so it can interlock with other bottles for stacking in shops. From a retailer’s point of view, it looks presentable, doesn’t crush and is easier for stacking”. In addition, the team provide fitting videos and aftercare support to retailers and end users.

POINT OF DIFFERENCE
While designing things like formulas and bottles is an element of the business, it is not the only one. Williams highlights that the multicoloured triggers within the car care range are ‘unique’ selling points in themselves, whereby, each bottle has its own mechanism, designed to make application simpler for customers. He says. “We don’t just develop the product, we also develop the trigger. For example, we have developed a pre-compressed trigger which allows easier application and restricts any leaks onto fingers and hands during use”.

A similar example Bowles and Williams demonstrated was their AdBlue container. Although this formula can’t be altered, this didn’t stop the team from creating another application solution. “We can’t make AdBlue different from anybody else because it’s a standard product according to regulations”, said Williams. “However, we can differentiate the way it’s delivered. We have done this by creating a siphoned nozzle with 360° action, which can be used in different positions to fill into the car”.

PARTNERSHIP
Recently, a number of factor chains have expressed interest in the firm’s products. Williams expands. “We recently signed a deal with Euro Car Parts who are taking on the Michelin brand. They requested a couple of products including our new Screen Wash sachets and they’re also stocking Michelin’s Tyre Pressure Monitoring Systems (TPMS)”, adding that the firm’s wiper blades have also sparked interest. Bowles and Williams have also been in meetings with battery suppliers, factor buying groups and accessory store chains, any of whom could become potential supply partners in the near future.

The firm is now planning to extend its fleet of vans and silver range of glass, leather and wheel cleaners (to name a few) launched at Automechanika Birmingham this year. Whatever market they’re supplying, the team will continue bringing out products that will not only make sales for retailers, but more importantly, ‘make life easier’ and simpler for the end-user.

Advertisement
  • The difference between the bulbs on sale right now
  • New debt collection rules explained
  • Painted calipers: Are they just a fashion statement?

more info

    • 'Electric vehicles will disrupt the aftermarket as we know it' Agree?

      View Results

      Loading ... Loading ...
    • Popular
    • Latest
    • Comments
    • Tags
    • Subscribe