Inside Line: RMI

1.4 TU3A engine 2006 to 2008 engine radiator fan will not switch of (intermittent fault) causing battery to drain – water ingress to fan control located on the cooling fan shroud.

1.6 16v 2006 to 2009 EM light keeps illuminating with fault codes P0030 and P0031 in the memory (no driveability issues) indicating a wiring fault , HO2Sensor or a fault with the ECU – ECU updates fixed this problem.

All petrol models various engines, poor running in general and 8 to 10 various fault codes recorded in the ECU – excessive build-up of carbon in the throttle housing and intake manifold resulting in the listed fault codes.

1.4 HDi 2006 – 2010 vibration under hard acceleration – inner driveshaft joints worn  (usually on high mileage vehicles).

1.6 VTi EP6 engine code 2007 to 2011 engine cranks and will not start no fault codes recorded in the ECU memory – relays damaged in the under bonnet fuse box by water ingress, these relays on most vehicle builds are part of the fuse box.

This post was written by:

- who has written 1169 posts on CAT Magazine.


Leave a Reply

Advertisement
  • What will Tetrosyl's new warehouse be used for?
  • Changes to data protection rules explained
  • Brake discs receive a makeover

more info

    • Given rising costs, do you think the number of van runs from factor branches will decrease?

      View Results

      Loading ... Loading ...
    • Popular
    • Latest
    • Comments
    • Tags
    • Subscribe