Tag Archive | "Induction Heat"

REMOVING TRICKY SEAT BELT BOLTS WITH INDUCTION HEAT

Tags: ,

REMOVING TRICKY SEAT BELT BOLTS WITH INDUCTION HEAT


PROMOTIONAL POST ON BEHALF OF INDUCTION INNOVATIONS

Ever had problems removing a stuck seat belt bolt? Induction heating makes difficult tasks like this easier and safer. With the Mini-Ductor® Venom® handheld induction heating tool from Induction Innovations, removing those stuck seat belt bolts becomes a much easier and safer process. Using Invisible Heat, the Mini-Ductor Venom releases metal from corrosion and thread lock compounds without the dangers of open flame in seconds.

The innovative Mini-Ductor Venom provides a safer, quicker and less damaging alternative to naked flame heating and a great return on investment.

For more information: 01953 859138 or www.theinductor.co.uk

Four Easy Steps to Remove Seat Belt Bolts

 

  • Step 1: Select the right coil (the pre-formed coils come in different sizes and can be bent to shape to suit the job).

 

 

 

 

  • Step 2: Secure the coil onto the Mini-Ductor Venom with twist lock.

 

 

 

 

  • Step 3: Place the coil around the bolt and heat (be cautious not to overheat or turn bolt red hot).

 

 

 

 

  • Step 4: Remove the bolt.

 

 

 

 

Induction Innovations has produced a series of step-by-step video guides to demonstrate some key applications for the Mini-Ductor Venom. You can view demonstration videos at www.youtube.com/user/theinductoruk

 

Posted in Featured Sidebar, Industry InsightComments (0)

REMOVING SUSPENSION BOLTS WITH MINI DUCTOR VENOM

Tags: , , ,

REMOVING SUSPENSION BOLTS WITH MINI DUCTOR VENOM


PROMOTIONAL ARTICLE ON BEHALF OF INDUCTION INNOVATIONS

 

 

Removing a rusted, corroded, or locked suspension bolt is often a lengthy, difficult and frustrating task, especially if using a ratchet wrench. It usually requires the application of penetrating fluid, or blasting the area with a torch – this is time consuming, can cause unwanted damage and it’s a potential risk to your safety.

However, help is at hand. The Mini-Ductor® Venom™ handheld induction heating tool heats metal parts in seconds using invisible, flameless heat.

This allows all types of adhesives bonded to metal, fasteners bonded with thread lock compound, and seized hardware to be removed and released much quicker and safer than by traditional naked flame heating.

Using a torch leads to heat being blown away from the load, wasting its energy and transferring its heat to unwanted areas. With the Mini-Ductor® Venom™ nearly all the energy pulled is applied to the load, using invisible heat, making the tool faster and more energy efficient.

Mechanics do not need to run the risk of using a torch which could damage the rubber ball joint, or the surrounding area.

The new tool improves workshop health & safety, saves time and reduces costs by being more efficient at removing rusted, corroded parts than by using a naked flame or other methods. And because the surrounding area is not damaged, the repair time is significantly reduced.

Apart from the increased safety benefits, it is estimated the use of the Venom™ can increase a garage’s part removal and repair productivity by over 50%.

How to remove a stubborn steering bolt easily with the Mini-Ductor® Venom™

Equipment needed: Heat resistant gloves, overalls, goggles and a respirator mask (if smoke will be produced from heating).

Knowledge required: A well-reviewed proficiency of the tools safety and operating instructions.

Step 1: Fit Correct Size Coil
Coils come in different diameters to suit different nut sizes.

step_1

Step 2: Bend the Coil to fit

step-2

Step 3: Attach Coil Using Twist Lock™
Coils lock down with one simple turn (no more thumb screws).

step-3

Step 4: Clean area with wire brush
Remove dirt and grease.

step_4

Step 5: Heat the nut for 15-20 seconds
Be cautious not to overheat or turn red hot.

step_5

Step 6: Use a selected tool to unscrew the nut.
Dispose of excessively heated hardware.

step6

To watch a video of this step by step guide, visit www.youtube.com/user/theinductoruk

Special Offer
For the month of February 2017 all orders for the Mini-Ductor® Venom™ will receive a free coil kit worth £125 + VAT.

Applications
Venom uses include removing/releasing the following:

• ABS sensors
• Brake bleeder nuts
• Corroded exhaust
• Fuel tank straps
• Heat treating
• Heavy undercoating’s applied over hardware
• Inline connectors
• Metal fabrication
• Manifold bolts
• O2 sensors
• Seat belt bolts
• Soft hail dents
• Steering/suspension components
• Tie rod sleeves/ends
• Truck bed bolts
• U-bolts
• Grease nipples/fittings

To order, or to find out more about the Mini-Ductor® Venom™ and its wide variety of applications, call 01953 859138, email info@theinductor.co.uk or visit http://theinductor.co.uk/index.php?route=product/product&product_id=78

Posted in Featured Sidebar, Industry InsightComments (0)

Advertisement
  • NEW AGE LEADERSHIP: Manage your business to manage without you
  • SPECIAL DELIVERY: Best practice in light fleet management
  • THE HARD CELL:  Charge up your battery profits

more info

    • Should hand car washes face further regulation?

      View Results

      Loading ... Loading ...
    • Popular
    • Latest
    • Comments
    • Tags
    • Subscribe